sash window locks with key Lock Door Handles

If you want to enhance the security of your home without compromising the aesthetics, choose doors with sash locks. They are used in conjunction with a mortice latch or sash lock and can be combined with a night latch to provide additional locking for internal doors.

These handles are an amalgamation of the lever and the handle placed on backplate. They are compatible with three- or five-lever mortice locks. They can be paired with tubes latches.

Lever Lock Handles

There are a variety of lever handles to match any style. Rustic lever handles work well with rustic or ranch-style decor and are also well-liked in modern homes. Classic lever handles are round or spherical and easy to hold. They are affordable, simple and fit in with any type of home design. Select polished or satin nickel chrome handles for a classy style. These finishes are durable and easy to clean. Other options include antique bronze as well as polished brass. Some handles have designs, such as amber worm-eyes, or long-horned cyrstals. Some levers have a pin, star or some other shape that is molded into the bottom.

To replace your lever lock door handles, first ensure you have the correct screwdriver or a tool to disassemble them. You may require an awl or nail based on the model and design. Some lever handles feature an oblique notch or hole at the base of the handle that can be used to pull them open.

Once you have the right tool, follow the manufacturer's instructions to take off your old handles. You'll need to verify the size of the spindle on your new sash windows lever handle. Doors that have been morticed (cut into the door) for latches that were previously used or locks, and need to be fitted to a specific spindle size. Most lever handle manufacturers offer the same standard door spindle size for handle.

If you are looking to replace a sash-lock door handle, remove the handle you have previously installed and disconnect the tubular latch bolt from the strike plate that is on the door frame. The latch bolt has to be put through an opening in the door's frame and connected to the strike plate.

It is important to remember that when you install the lever handle for the first time the handles that comply with the ADA (Americans with Disabilities Act), are designed to operate by hand. The user should not be required to grip their hands tightly or twist their wrists. To meet ADA compliance standards, the lever door handle cannot be operated using only the thumb and finger or the entire hand.

Sash Lock Handles

The main function of sash locks is to seal the door by pulling the sashes that move tightly together. This stops drafts from entering the room and also helps maintain indoor temperatures, which can help save energy bills throughout the year. They also work well for doors that don't require the security of the keyed locking system.

Mortice sashlocks can be described as sash locks that combine the latch and deadbolt into one case. They are fitted to the door's material. They are used in conjunction with door handles and there are a myriad of choices to fit your home.

The lever handles for locking is operated by a lever that has a hole cut in the backplate below. This allows a key that is inserted into the mortice frame to operate the lever. This lock is typically used on non-locking interior doors such as those in dining rooms and living rooms. However, it can also be utilized with a tubular lock for the security of the door.

These are designed to hold the mock sash upvc windows together for multiple times and also have hooks that fit inside the keeper. They come in various styles and designs that can be fitted into different types of windows like sliding sash windows or hinged casement windows. Some are made of cast aluminium, whereas others are made from brass and even iron wrought. They're available in a range of finishes to complement other components of your door furniture, such as escutcheon plates that protect the keyhole.

The 3 lever sash locks only suitable for doors that are internal. They don't provide the level of security required by insurance companies. They also have a lower resistance to forced entry, making them more vulnerable than their certified 5 lever counterparts.

A door sash that has five levers is the ideal option for external doors. It offers higher levels resistance to forced entry and is more difficult to bypass or pick. These locks are a brand new design that has been tested and certified to meet the strict building, fire and disability regulations.

The first step to replace the handle on a sash lock is to remove the old fastener, by removing the screws from both ends. Make sure you have a screwdriver handy and carefully separate the components to ensure that there is no damage. Use a pencil to mark the location of the screw holes so that you can align the new fastener in a correct manner when it comes to fitting. Clean up any dust or flickers of paint before screwing the new fastener into place. Test the handle to make sure it functions properly and creates an airtight seal.

Tubular Latch Handles

The tubular latch is a latch mechanism which is positioned inside a door and is operated by turning your handle. It is designed to latch a door shut but does not secure it like mortices. They are usually used on internal doors where there is no requirement for locking. They can be fitted either with lever handles or knobs.

Tubular latches are available in different sizes. They range from the cheapest to high-end architectural quality. The size of the door depends on its use and whether it comes with a lock. For instance bathrooms may need to have the ability to turn a thumbturn and release in the event in an emergency, therefore you will need an latch that can be locked.

Choosing the right latch also depends on the backset size of your door. You must select the latch with a backset measurement that is equal to the distance between the edge and the centre of your door's hole for the handle rose or knob. This will ensure that the handle/door knobs are able to operate the latch with ease.

If you're installing a spring or unsprung lever or door knob, it is essential to select a heavy duty tubular latch that has an oversized sprung follower and tongue. This will provide an easy action for the latch, and stop it from becoming slow and inactive after regular use.

The next step is to put the latch onto the door. The first step is to ensure that the latch is leveled to the top of your door frame/casing. Mark the location of the plate and drill holes. Utilizing a countersink drill can help create the correct recess for it to fit comfortably into.

Once the latch is installed, you can install it onto the door. Before installing your door handles or locks it is essential to ensure that the latch is working properly. To check this simply open and close the door several times. If it's not working correctly Try lubricating the door using WD40. Then re-try it. If you continue to experience problems, it might be necessary to call a professional installer or locksmith.

Keyhole Handles

Keyhole handles work with a tubular lock installed in the door. The latch is used to open and shut the door. When the handle is pushed down, the handle engages the latch and when pulled up, it opens the door to open. These kinds of handles are usually used on doors with internal openings such as living rooms or doors for dining rooms, but they can also be used on front doors when paired with a nightlatch.

Door knobs are a modern type of handle that combines spring-loaded levers/handles on a round or square fixing rose, with an accompanying thumb turn or escutcheon. They are available in a wide variety of styles and finishes to match different doors in the home. They can be used with Euro cylinder locks or multipoint locking systems that provide additional security to the door. This is achieved by locking the door at various points along the height of the door. Compatible door handles must be fitted with the proper dimensions for the center of the lock to fit the barrel.

Keyhole escutcheons serve as an escutcheon that covers the door's key hole to conceal it from view and create an elegant appearance to the handle. They are available in an open or screw on design and come in a variety of finishes that match the door handle. Alternatively, a concealed escutcheon is able to be attached to the edge of the door to conceal the keyhole and create a more modern look.

Most of the handles discussed above are designed to work with either a mortice or sash lock mechanism. However, some of them are compatible with Euro cylinder locks too. They are designed for uPVC doors and require door handles with a Euro cutout for a cylinder and the appropriate screw holes inside the backplate to accommodate the euro cylinder. These handles may also require an escutcheon for Euro-cylinders or a standard escutcheon according to the use.

If you decide to use mortice lock, wooden sash window lock or tubular latch for your door, it's essential to know the distinct features of each and the requirements they require to be compatible with the other components of your uPVC door system. You'll need to take into consideration the door's thickness as well as the hinges for your door and frame reinforcements, the dimensions of the backplate for the handle, the lock's central dimensions and the screw centers on the cylinder.