Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they don't corrosion or rot.

It is important to clean and oil UPVC doors and windows regularly. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home and even be fatal. It is important to ensure that your windows are in good condition.

For single pane windows it is fairly easy to replace them, and the replacement will generally fit within the old frame very easily. If you have double-paned windows which are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this case it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

If you plan to try to remove the window panes by yourself, it is essential to wear the appropriate safety equipment such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth before you begin working on the glass so that any shards will fall onto the cloth instead of onto the floor where they can be trodden under and cause further damage.

It's a great idea to seal the gap after the glass has been removed. This will keep water and drafts from entering your property until a professional arrives to repair the window. It also acts as an obstacle to stop intruders from getting into your home. If the gap is particularly large, you may think about the security door with an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber sash windows. However, over time they are susceptible to a range of issues, including sliding. A sagging window can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from getting worse.

Repositioning the hinges can help fix a window that is sliding. To accomplish this, you'll need open the window to access the frame. Then, you can remove the hinges on the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you've moved your hinges. If you're satisfied with the fit of your window, you can tighten screws to secure them in the right position.

If you aren't able to move the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to loose their elasticity. If this happens, it's important to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and safe from drafts.

uPVC handles may also become loose. Often this is due to screws that have become loose over time. However, it could also happen because the handle mechanism has worn out. It's relatively simple to repair double glazing a loose uPVC handle. You'll first need to close the window and do a test fitting. The joint at the corner of the sash should align with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle and then reverse the mechanism back into position.

3. Water Leaks

If you're waking up to wet floors and damp walls every time it rains it's crucial to take action. Leaks of water from windows can cause structural damage to your home and also hinder your ability to control the temperature inside your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or missing.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the issue is, old caulking may need to be removed. It is essential to remember that when it is about uPVC window repairs, you should not be tempted to apply too much caulk' as this will only make the area more difficult to clean and could decrease the efficiency of your energy usage.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan has been angled correctly so that it drains away from the window. In more extreme situations, you may have to replace the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives under conditions of dampness and can spread quickly throughout the home.

If the leakage occurs between the double-glazed glass, it is more likely the issue is with the seal rather than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows repairs near me.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open with ease It could be the hinges that are at fault. These are easily replaced by any competent DIYer and can be completed in just a few minutes.

Almost every household in the UK will have top-hung or side hung upvc doors repair windows that use hinges and like any mechanical part they will wear out over time. It's very simple to change the hinges on a window but it's much easier if someone helps hold the frame.

It is also worth checking that the uPVC hinges are being opened and closed in the correct direction. You can check this by looking for the arrows on each hinge, this indicates the direction in which the window should open.

Faulty window hinges could be the result of incorrectly opening the window a certain way or by poor installation at the factory. Sending us photos through our website can often solve the issue. We are more than happy to offer suggestions.

It is also essential to grease the hinges regularly. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. It is recommended to perform this every year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges may also become disaligned as a result of wear, which can cause a gap between the frame and sash. If they are beyond repair, it may be necessary to get them re-aligned. The interlock may also become disaligned. This is located on the hinge's side and might require to be cleaned. In some cases, it may be necessary to replace the hinges.

The second most frequent reason for draughts is window seals, these are susceptible to being worn out or damaged over time and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window glass repair near me with low-emissivity glass, this will help in regulating indoor temperatures, and also lessen the risk of draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are usually fabric tubes filled with a filler which can be put on top of your window sill. They can keep your home warm by blocking cold air.

With a little maintenance and repairs your windows made of upvc will continue to provide excellent insulation and security for your home. It is essential to remember that all windows will eventually become worn out, and it could be more cost-effective to replace them instead of fixing them. If you have any problems with your upvc window it is recommended to speak with a professional as soon as you can.