Sash Lock Door Handles

If you want to enhance the security of your home, without compromising the aesthetics, choose sash lock door handles. They're used with a mortice latch or sash lock and can be combined with a night latch to provide additional locking for doors inside.

The handles are made up of a handle/lever on the backplate. They are usually used with a three or five lever mortice lock. They can be used in conjunction with a tube latch.

Lever Lock Handles

There are a variety of lever door handles to match any home decor. Rustic lever handles work well with farmhouse or ranch-style decoration and are also well-liked in modern homes. Classic lever handles can be circular or spherical, and are easy to hold. They are simple, affordable and fit in with any home decor. To create a chic appearance, choose a polished chrome or satin nickel handle. These finishes are robust and easy to clean. Other options include antique bronze and polished brass. A lot of handles feature a decorative design, such as small amber worm eyes, or long-horned crystals. Some feature an elongated pin or star molded into the bottom of the lever.

To replace the lever lock door handles you require the appropriate screwdriver or tool to remove the handles. You may require an awl, or a nail depending on the design and model. Some lever handles have a small notch or hole on the opposite side of the base which can be used to pry it open.

Once you have the right tool Follow the instructions of the manufacturer to take off your old handles. You'll need to determine the size of the spindle on the new lever handle. Doors that have been morticed (cut into the door) for latches that were previously used or locks, and must be fitted to a specific spindle size. Most lever handle manufacturers use the standard door handle spindle.

If you wish to replace a double glazed sash windows-lock door handle, you must remove the handle you have previously installed and disconnect the tubular latch bolt from the strike plate on the door frame. You will then need to drill a hole into the door frame, then insert the latch bolt through and connect it to the strike plate within the door frame.

It is crucial to remember that when you install new lever handles the handles that comply with the ADA (Americans with Disabilities Act), are designed to operate with a hand. The user must not be required to grip tightly or twist their wrist. To meet ADA compliance standards, the lever door handle must not be operated with fingers and thumbs, or even the entire hand.

Sash Lock Handles

The main function of door handles for sash window locks is to pull the sashes moving together in a tight seal. This helps maintain the temperature inside the house and stops drafts. These locks are great for doors that do not call for a keyed lock system.

sash window repairs locks are sometimes called mortice sashlocks and combine a dead bolt and latch into one case fitted to the surface of a door. They are often used in conjunction with door handles and are available with a wide range of options.

The lever lock handle is operated by a lever that has an opening cut into the backplate below. This allows a key to be inserted into the mortice sash to operate the lever. This lock is usually used on non-locking interior doors like those found in living rooms and dining rooms. However, it is also possible to use with a tubular lock for an extra secure door.

These are designed to keep the sash in place at several points, and have hooks that fit inside the keeper. They're available in different styles and designs that can be fitted into different types of windows, such as sliding or hinged casement windows. Some are made of cast aluminium while others are made of brass or wrought iron. They're available in a range of finishes that match other components of your door furniture like escutcheon plates to guard the keyhole.

3 lever sash locks can be used on doors inside but not for external doors, because they lack the level of security that insurance companies require. They also have a lower resistance to forced entry, which makes them more vulnerable than their certified 5 lever counterparts.

A door sash lock with five levers is a better option for external doors, as it offers higher levels of resistance to forced entry and is harder to pick or bypass. These locks are a new design that has been tested and certified to meet the strict building regulations, fire and disability.

To replace a handle on a sash-lock remove the old fastener from both ends by taking out the screws. Be sure to have a screwdriver on hand and take care to separate the components so as not to damage them. Mark the screw holes with pencil to align the new fastener properly when you are ready to install it. Clean any paint or dust particles, and then screw into the new fastener. It's important to test the handle to ensure it functions properly and forms a an effective seal.

Tubular Latch Handles

The tubular latch is a latch mechanism that sits inside a door and is operated by turning the handle. It is designed to shut a door but does not lock it like mortice locks. They are most commonly used on internal doors, in which locking is not needed. They can be fitted with knob handles or levers.

Tubular latches are available in a variety of sizes. They range from basic to the highest quality architectural quality. The dimensions of the door depend on its purpose and whether it comes with locks. If you need an emergency release mechanism that can be triggered by thumbs an emergency situation, then you need a lockable latch.

The selection of the correct latch is dependent on the backset measurement of your door. This is the distance between the edge of your door and the center of the hole for the door handle rose/knob, and you must choose a latch that has an identical backset measurement. This will ensure your handle/door knobs can operate the latch smoothly.

If you are installing an unsprung or sprung lever or door knob it is crucial to choose a sturdy tubular latch with an oversized sprung follower and tongue. This will ensure an easy operation for the latch and stop it from becoming sluggish and ineffective with frequent use.

Once you have selected the right latch to meet your needs The next step is to attach it onto the door. The first step is to make sure that the latch is aligned to the top of the door frame or casing. Then mark the location of the latch and drill holes. Countersink drill bits can aid in creating the proper recess to allow it to fit comfortably.

After the latch has been installed, you can screw it into the door. Before installing your door handles or locks it is essential to check that the latch is working properly. To do this, open and close the door several times. If it's not working correctly, try lubricating the door with WD40 and re-trying it again. If you are still experiencing problems then it might be necessary to speak with a locksmith or a professional installer.

Keyhole Handles

Keyhole handles are fitted with a tubular latch that is installed inside the door. The latch is used to open and shut the door. When pushed down, the handle engages the latch, and when pulled up, it opens the door to be opened. These types of handles are usually used on internal doors like living rooms and doors for dining rooms, but they can also be used on front doors when paired with the nightlatch.

Door knobs are a contemporary kind of handle that has spring-loaded levers/handles on a round or square fixing rose with an accompanying thumb turn or an escutcheon. They are available in a wide variety of styles and finishes to fit different doors around the home. They can be used with Euro cylinders or multipoint locking systems to provide added security. This is accomplished by locking the door at various points along the length of the door. Door handles that are compatible must be fitted with the proper lock center dimension to accommodate the barrel.

A keyhole escutcheon covers the existing keyhole in the door to hide it and give the handle a more stylish appearance. They come in both an open or screw on style and are available in a variety of finishes to match the door handle. A recessed escutcheon that is attached to the outside of the door to conceal the keyhole more and give it a modern appearance, can also be utilized.

Most of the handles discussed above are designed to be used with either a mortice lock or sash window cost lock mechanism, however some are compatible with Euro cylinder locks as well. These are used on uPVC doors and require compatible door handles that have a Euro cutout for the cylinder and appropriate screw holes in the backplate to accommodate the euro cylinder. These handles will also require a Euro Cylinder escutcheon, or a standard escutcheon depending on the use.

Whether you choose a mortice lock or a sash window repairs lock, or a tubular latch for your door, it's important to know the distinct features of each and the requirements they require for compatibility with the other components of your uPVC door system. You'll need to consider the thickness of your door, door hinges and frame reinforcements, as well as the door handle backplate size, lock centre dimensions and the screw centres for the cylinder.