Tips For replacing a window handle (read article)

The replacement of your window handle is a simple task that can be completed in the comfort of your own home. Follow these guidelines to ensure an elegant and smooth finish.

Start by removing the screw covers to expose the screws within your uPVC window handle. Then, measure the length of the spindle to ensure that you get the right size replacement upvc window handles.

1. Determine the Spindle Length

When replacing a window handle it's important to get the size of the spindle correct. It can affect the tightness or elasticity of the handle, as well as whether the handle will lock correctly into the window frame. The spindle is a metallic shaft that connects the handle to the lock in the window frame. The spindle is available in either the standard 8mm cross-section for industry or older versions of 9mm. Modern industry standards are 8mm, but it wasn't always that way. It is crucial to check the measurements when buying the handle you want to purchase.

Remove the handle. This can be done easily by turning the handle into the open position, then unscrewing two screws that hold the handle in place (which are usually hidden behind plastic caps that are required to be removed). After removal, take a measurement from the base of the handle to the end of the spindle. This will provide you with the measurements you need to purchase a replacement.

There are a lot of options to consider when selecting a new window handle, from sleek chrome that fits into a contemporary home to traditional brass that looks stunning in restored Georgian rooms or even the more classic Tudor cottages with curled monkey tail latches! There are a lot of options, but the most important is to choose a style that matches your home's style.

Espag handles are commonly installed to uPVC window frames and are always the exact same size with a 43mm center. Cockspur handles vary between 58mm and 62mm, but there are replacements for both sizes. Window handles made of Cadenza have distinct dimensions because they have an angle blade that operates a multi-point lock mechanism inside the window.

Another factor when choosing the best window handle is determining what hand you will need, this is simply defined by the hand you use to open the double glazed door handles. Inline espag handles can be used for left or right-handed windows. Cranked window bi-fold doors handles are hand-operated and are only used on windows that open in one direction.

2. Remove the Handle

Whether the handle is damaged or simply worn out or simply worn out, a window handle that is shattered can be very frustrating. The good news is that you can fix the uPVC handle yourself. You only need a few basic hand tools and some time to complete the process.

First, you must open the window and make sure that it is in an unlocked position. Then, remove the screw caps holding the handle in place. Once these are removed, you are able working on the removal of the handle itself.

The handle is attached to a spindle in the window frame. Depending on the type, this is secured with a screw or pin. The most commonly used handles are the inline Espagnolette and the cockspur handles. Both kinds of handles are found on casement windows including aluminium ones. They can be locked using a key to prevent unauthorised opening of the window from the outside, or you can lock them by turning the handle clockwise.

To remove the handle you will need a flat-bladed screwdriver. After the clip has been released, the handle should be able to slide off the spindle. After the handle has been removed, you'll have to determine the length of the spindle to ensure that your new handle is compatible with this size.

Once you have decided on the proper size of the handle, you can screw it into the correct position. You must ensure that the new handle is securely fixed and is turning in the correct way (clockwise for open and counterclockwise for closed). It is also crucial to make sure that it is not fitted upside down.

Finally, you should replace the screw cover caps. Once you have done this you can test the handle to make sure that it is working correctly. You should also test the locking mechanism by moving the handle from the locked position, and then back to the locked position.

3. Remove the Screws

A upvc door handle handle is an important part of any house and is the first thing that shows signs of wear or damage. This can be caused by natural causes or from regular use and sometimes even deliberate damage by opportunistic criminals who might want to open a closed window to gain access to your home. A simple repair can fix the issue and stop it from occurring again.

UPVC handles can also be difficult to remove if the locking mechanisms aren't working properly. In most cases, the issue can be solved by replacing the multipoint lock, rather than the entire handle. It's certainly worth checking this as it can save you money.

Once you've removed your old handle you'll need to remove the screws holding it in place. These are typically located on the inside face of the base. It is possible to use a screwdriver to do this. Be careful not to tighten too much the handle as this could cause it to loosen.

You'll then have to find the fixing screws or pins that keep the new handle in the correct position. These are likely to be located on the inside of the handle base and you will need to use an screwdriver or a pair of pliers to remove them. If you want to replace them, you can do so by replacing the caps on the screw and test the handle to ensure it functions properly.

Install the handle by aligning the spindle with the cutout in the window mechanism. Then screw it in. If you're looking to replace the screw covers ensure that the handle is in a slack position and that the screws are securely fixed. You're done! Now you can enjoy the newly installed window handle. This should allow you to avoid costly mila door handles and window replacements in the future. If you would like more help with this or any other aspect of your uPVC windows don't hesitate to get in touch with us.

4. Install the New Handle

The process of replacing a broken window handle or updating it is easy and can be completed within just a few steps. Identifying the type of window handle, measuring its spindle length, and knowing the tools you'll require to complete the task are key. Always consider the safety of your windows and tools. It is also essential to be patient and follow the steps with care to ensure you have a functioning handle that is safe to use.

The first step is to locate the screws holding your existing window handle and remove these, whilst keeping an adequate grip on the handle to prevent it from crashing and result in injury. After the screws have been removed and repositioned, they can be put in a secure location to be replaced in the future.

After you have removed the handle, you are now able to put in your new one. It is important that the handle is fitted perfectly to ensure it is functional and secures the window in its place. The next step is to slide the metal square on the back of the handle into the hole of the window mechanism, ensuring that it is secure.

Now that your new handle is installed, the final step is to replace the screw caps and verify that it works. If you aren't satisfied with the outcome or if your window doesn't open and close as it should, the next step is to contact our experts who can help.

Most UK homes are equipped with uPVC Windows. As such, many will require replacement at some point because of wear and tear or breakage. Anyone with a little DIY knowledge can complete the task. The most important aspect in the success of the process is making sure you're using a replacement handle that is compatible with your window's size and design. Contact our team if you are unsure about the type of handle you require. They'll be able guide you through the choices.