Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they don't corrosion or rot.

It is essential to clean and oil UPVC windows and doors regularly. This will save you from unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, making it extremely dangerous and possibly fatal. It is essential to ensure that your windows are in good condition.

For single pane windows it is relatively easy to replace them, and the new window will generally fit within the frame of the previous one easily. If you have double-paned windows which are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this situation it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass by yourself. You should also lay down a dropcloth prior to you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not on the floor which could cause them to be trampled under.

It's a great idea tape the gap once the glass has been removed. This will prevent drafts and water from entering your property until a professional arrives to fix the window. This also serves as an obstacle to stop intruders from getting into your home. If the distance between the window and the door is significant, you may prefer a security screen that also includes windows. This will give you the best of both.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. As time passes, they may be affected by a variety of issues, including sliding. A sagging window in uPVC can cause problems with light, draughts, and even security. It's important to take action as soon as you notice your uPVC windows are sliding.

To fix a window that is sagging you can try repositioning the hinges. You'll first need to open the windows so you can access the frame. Then, remove both the hinges at the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to test the fit after having relocated your hinges. If you are happy with the size of the window, you can tighten screws to hold them in place.

If you aren't able to move the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to lose their tightness. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows are watertight and draught-proof.

uPVC handles may also loosen. Often this is due to screws that have come loose over time. However, it can be due to the fact that the handle mechanism has been worn out. Fortunately, it's easy to fix the loose uPVC window handle yourself. First, you'll need to shut the window and do an initial fitting. The joint at the corner of the sash must align with the joint on the casing. If it does not you can use a screwdriver to loosen up the handle. Then turn the mechanism to position.

3. Water Leaks

It is essential to act if you awake each day to find mouldy walls and wet floors. The leaks of water from windows do are not just a cause for degradation of your home's structure but also undermine your efforts to control the temperature in your home. The most common reason for leaks in uPVC windows is that the sealant around the frame is either damaged or not present.

This is an easy fix that can be accomplished by any DIYer who is competent. Depending on the severity of the problem is, the old caulking may need to be removed. It is essential to keep in mind that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk' as this will only make the area harder to clean and can reduce the efficiency of your energy.

Make sure that the drainage holes do not have debris inside them and that the sill pan has been properly angled to drain away from the window. In more serious situations, you might need to consider replacing the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to keep in mind that if the leakage is coming from between the glass of your double glazed window repairs near me glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or if it opens in a breeze. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical component hinges are prone to wear out over time. The process of replacing a hinge on a window is essentially a very simple process, but it's simpler if you have someone to help hold the frame up.

It is also important to ensure that the uPVC hinges are opened and closed in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The issue can be caused by opening the window improperly or due to a poor installation in the factory. This issue can be fixed by sending us a photograph through our website and we will be pleased to offer you suggestions.

It is also important to lubricate the hinges regularly. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window open and close more easily. It also helps prevent corrosion and reduce the possibility of sticking. This is recommended to be done at least once a year. WD40 and other solvent based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by various factors. Firstly the hinges, again due to wear and tear may become displaced, which will cause a gap to form where the sash meets the frame. They can be repaired by giving them a thorough clean, however in the event that they are beyond repair it might be necessary to get them realigned or replaced. The interlock may also become misaligned. It is located on the hinge's side and may need to be cleaned. In certain instances, it may be necessary to replace the hinges.

The seals may wear out or get damaged over time, allowing air to escape. Installing high-quality weatherstripping can help keep draughts at bay. Replace the windows made of Upvc with low-emissivity lenses. This will help control indoor temperatures, and reduce the possibility of draughts.

The final method to cut down on drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler, which can be hung over your window sill. They will keep your home warm by blocking out cold air.

Your upvc windows can keep providing excellent insulation and security to your home by performing regular maintenance and repairs. However, it is important to recognise that all windows have a lifespan and they may reach the point when it's more efficient to replace them than fix them. If you encounter any issues with your window made of upvc it is recommended to speak with an expert as soon as possible.