Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. They do not decay or rust as timber and aluminum.

It is crucial to wash and oil UPVC doors and windows regularly. This will reduce costly repairs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home, and could even be fatal. It is important to ensure that your windows are in good working order.

For single pane windows, it can be relatively simple to replace them, and the replacement will usually fit inside the old frame very easily. However If windows with double panes are secured by internal beading it will be more difficult to take out the panes that are in place and replace them with new ones. In this instance, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.

If you are going to attempt to remove the window panes by yourself it is important to wear the proper safety gear such as gloves that are thick and eye protection. It is also a good idea to lay down a drop cloth prior to when you begin working on the glass so that any shards will fall on the fabric instead of onto the floor, where they could be trodden under and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to prevent water and drafts from entering the home until a professional comes out and repair the window. This will also act as a barrier that will prevent any intruders to gain access into your home. If the distance between the window and the door is substantial, you may prefer a security screen that also has a window. This will provide the best of both.

2. Sagging

uPVC windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows with sash. However, over time they are susceptible to a range of issues, including sagging. A sagging uPVC windows can cause problems with light, draughts, and even security. If you notice that your uPVC window repairs near me is beginning to shrink, it is important to act swiftly to stop the issue from becoming worse.

Repositioning the hinges can help fix a window that is sliding. To accomplish this, you'll need open the window to get to the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window repairs near me to test the fit after you have repositioned your hinges. If you are happy with the fit of your window, tighten the screws to secure them in place.

If you can't reposition the hinges you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, leading them to lose their tightness. If this happens, it's essential to replace the seal as fast as possible so that your uPVC windows are watertight and draught-proof.

uPVC handles could also become loose. Often, this is caused by screws that have become loose over time. However, it can occur because the handle mechanism has been worn out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. You'll first need to close the window and do an experiment fitting. The joint at the corner of the sash should align with the joint on the casing. If it doesn't then you can use a screwdriver or a wrench to loosen the handle and then return the mechanism to its original the position it was in.

3. Water Leaks

It is essential to take action if you wake up every morning to discover mouldy walls and floors that are wet. Water leaks from windows not only lead to the degrading of the structure of your home but also undermine your efforts to regulate the temperature in your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or is missing.

This is an easy fix that can be accomplished by any DIYer who has the ability. Depending on how severe the issue is, the old caulking may need to be removed. It is essential to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and could reduce the efficiency of your energy.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more extreme instances, you may need to replace the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage is occurring between the double-glazed window, it is more likely that the issue is more related to the seal, not the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame when your upvc window repair near me window is difficult to open or it opens with a breeze. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical part hinges are prone to wear out over time. It's easy to replace a hinge on a window however it is easier if someone helps you to hold the frame.

Verify that the uPVC hinges open and close in the right direction. This can be done by checking for the arrows on each hinge, this shows which way the window should be opened.

The issue can be caused by opening the window improperly or a faulty installation in the factory. This can often be resolved by sending us a picture through our website and we will be more than happy to give you advice.

Regularly lubricating the hinges is essential. This can be accomplished by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also reduce the risk of a window sticking and prevent corrosion. This is recommended to be done at least every year. WD40 and other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different factors. First, the hinges because of wear and tear, may become displaced, which can cause an opening to appear where the sash meets the frame. If they are damaged beyond repair, it might be necessary to have them realigned. Secondly the interlock, this is located on the hinge of the window, can also be misaligned, and again it may be possible to just give them a good clean, but in certain cases, it may be necessary to get them replaced.

The second most frequent reason for draughts are the window repairs near me seals. These can become worn down or damaged over time and allow air to escape through these gaps. Replacement of these with high-quality weatherstripping is a good way to prevent draughts. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures and again will lessen the possibility of draughts.

Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler that can be hung over your window sill. These will help to stop cold air from entering and keep your home warm and cosy!

Your windows made of upvc will continue to provide excellent insulation and security to your home with regular maintenance and repairs. It is important to remember that all windows will eventually wear out and it could be more cost-effective to simply replace them than to repair them. If you are experiencing issues with your Upvc window, it's best to consult a professional as soon as possible.